Progress towards a methodology for high throughput 3D reconstruction of soot nanoparticles via electron tomography.

The aim of this work is to make progress towards the development of 3D reconstruction as a legitimate alternative to traditional 2D characterization of soot. Time constraints are the greatest opposition to its implementation, as currently reconstruction of a single soot particle takes around 5-6 h to complete. As such, the accuracy and detail gains are currently insufficient to challenge 2D characterization of a representative sample (e.g. 200 particles). This work is a consideration of the optimization of the steps included within the computational reconstruction and manual segmentation of soot particles. Our optimal process reduced the time required by over 70% in comparison to a typical procedure, whilst producing models with no appreciable decrease in quality.

Stable DHLA-PEG capped PbS quantum dots: from synthesis to near-infrared biomedical imaging.

The short shelf-life of water-soluble quantum dots (QDs) due to colloidal instability represents a major drawback to their exploitation. This work examines the colloidal stability of PbS nanoparticles capped with dihydrolipoic acid-polyethylene glycol (DHLA-PEG) ligands terminated with functional groups such as -NH2, -COOH, OMe and -N3. and their application for in vivo imaging. We prove a mechanism of colloidal instability and develop a strategy to produce for the first time stable PEG-capped PbS quantum dots with high quantum yield and optical emission in the first and the second near-infrared (NIR) windows of low absorption of biological tissues. The NIR imaging of in vivo biodistribution is demonstrated at wavelengths >1000 nm, with benefits of reduced tissue absorption and light scattering. The stability, biocompatibility and potential for further QD functionalization open up realistic prospects for non-invasive bioimaging applications.

A one-pot-one-reactant synthesis of platinum compounds at the nanoscale.

The preparation of inorganic nanomaterials with a desired structure and specific properties requires the ability to strictly control their size, shape and composition. A series of chemical reactions with platinum compounds carried out within the 1.5 nm wide channel of single-walled carbon nanotubes (SWNTs) have demonstrated the ability of SWNTs to act as both a very effective reaction vessel and a template for the formation of nanocrystals of platinum di-iodide and platinum di-sulphide, materials that are difficult to synthesise in the form of nanoparticles by traditional synthetic methods. The stepwise synthesis inside nanotubes has enabled the formation of Pt compounds to be monitored at each step of the reaction by aberration-corrected high resolution transmission electron microscopy (AC-HRTEM), verifying the atomic structures of the products, and by an innovative combination of fluorescence-detected X-ray absorption spectroscopy (FD-XAS) and Raman spectroscopy, monitoring the oxidation states of the platinum guest-compounds within the nanotube and the vibrational properties of the host-SWNT, respectively. This coupling of complementary spectroscopies reveals that electron transfer between the guest-compound and the host-SWNT can occur in either direction depending on the composition and structure of the guest. A new approach for nanoscale synthesis in nanotubes developed in this study utilises the versatile coordination chemistry of Pt which has enabled the insertion of the required chemical elements (e.g. metal and halogens or chalcogens) into the nanoreactor in the correct proportions for the controlled formation of PtI2 and PtS2 with the correct stoichiometry.

Growth of single-layer boron nitride dome-shaped nanostructures catalysed by iron clusters.

We report on the growth and formation of single-layer boron nitride dome-shaped nanostructures mediated by small iron clusters located on flakes of hexagonal boron nitride. The nanostructures were synthesized in situ at high temperature inside a transmission electron microscope while the e-beam was blanked. The formation process, typically originating at defective step-edges on the boron nitride support, was investigated using a combination of transmission electron microscopy, electron energy loss spectroscopy and computational modelling. Computational modelling showed that the domes exhibit a nanotube-like structure with flat circular caps and that their stability was comparable to that of a single boron nitride layer.

Ag-catalysed cutting of multi-walled carbon nanotubes.

In this work, the cutting of carbon nanotubes is investigated using silver nanoparticles deposited on arc discharge multi-walled carbon nanotubes. The composite is subsequently heated in air to fabricate shortened multi-walled nanotubes. Complementary transmission electron microscopy and spectroscopy techniques shed light on the cutting mechanism. The nanotube cutting is catalysed by the fundamental mechanism based on the coordination of the silver atoms to the π-bonds of carbon nanotubes. As a result of the metal coordination, the strength of the carbon-carbon bond is reduced, promoting the oxidation of carbon at lower temperature when heated in air, or lowering the activation energy required for the removal of carbon atoms by electron beam irradiation, assuring in both cases the cutting of the nanotubes.

Tuneable paramagnetic susceptibility and exciton g-factor in Mn-doped PbS colloidal nanocrystals.

We report on PbS colloidal nanocrystals that combine within one structure solubility in physiological solvents with near-infrared photoluminescence, and magnetic and optical properties tuneable by the controlled incorporation of magnetic impurities (Mn). We use high magnetic fields (B up to 30 T) to measure the magnetization of the nanocrystals in liquid and the strength of the sp-d exchange interaction between the exciton and the Mn-ions. With increasing Mn-content from 0.1% to 7%, the mass magnetic susceptibility increases at a rate of ∼ 10(-7) m(3) kg(-1) per Mn percentage; correspondingly, the exciton g-factor decreases from 0.47 to 0.10. The controlled modification of the paramagnetism, fluorescence and exciton g-factor of the nanocrystals is relevant to the implementation of these paramagnetic semiconductor nanocrystals in quantum technologies ranging from quantum information to magnetic resonance imaging.

Tailoring the physical properties of thiol-capped PbS quantum dots by thermal annealing.

We show that the thermal annealing of thiol-capped PbS colloidal quantum dots provides a means of narrowing the nanoparticle size distribution, increasing the size of the quantum dots and facilitating their coalescence preferentially along the 100 crystallographic axes. We exploit these phenomena to tune the photoluminescence emission of an ensemble of dots and to narrow the optical linewidth to values that compare with those reported at room temperature for single PbS quantum dots. We probe the influence of annealing on the electronic properties of the quantum dots by temperature dependent studies of the photoluminescence and magneto-photoluminescence.

An appraisal of ultramicrotomy, FIBSEM and cryogenic FIBSEM techniques for the sectioning of biological cells on titanium substrates for TEM investigation.

Ultramicrotomy, focused ion beam scanning electron microscopy (FIBSEM) and cryogenic FIBSEM (cryo-FIBSEM) techniques, as developed for the controlled cross-sectioning of mesenchymal stem cells (MSCs) and human osteoblasts (HObs) on titanium (Ti) substrates for transmission electron microscopy (TEM) investigation, are compared. Conventional ultramicrotomy has been used to section cells on Ti-foil substrates embedded in resin, but significant problems with cell detachment using this technique restricted its general applicability. Conventional FIBSEM 'lift-out' procedures were found to be effective for the preparation of uniform sections of fixed and dehydrated cell/Ti specimens, but the control of cell staining remains an issue. Cryo-FIBSEM procedures used with an 'H-bar' sample geometry enabled the sectioning of fixed and hydrated cell/Ti specimens, but issues remain over ion beam-induced artefacts and control of frost on the sample foils.

Glucocorticoid-induced glycogen increases in extensor digitorum longus and soleus grafts in the rat.

The purpose of the present study was to compare dexamethasone-induced glycogen increases in normal EDL and SOL muscles with that in free muscle grafts. Glycogen in mature EDL and SOL grafts in the rat equalled control concentrations irrespective of whether the graft was a nerve-intact (NI), nerve-crushed (NC), reimplanted, or cross-transplanted graft. The grafts also possessed the glycogen-regulatory mechanisms to respond to the glucocorticoid dexamethasone (DEX), which increases muscle glycogen. The increase in glycogen induced by DEX in the EDL and SOL grafts resembled that of the EDL and SOL muscles, respectively, whether the grafted muscle was originally an EDL or SOL. DEX induced an approximate twofold increase in glycogen concentration in control muscles and nerve-intact SOL grafts, and a smaller but significant increase in all other free grafts. Nerve crushing prior to grafting resulted in no significant change in muscle weight, glycogen concentration, or DEX-induced glycogen increase in these grafts. The data suggest that skeletal muscle grafts are qualitatively similar to normal muscles in terms of metabolic responsiveness to hormones. Leaving the nerve intact during grafting quantitatively enhances the graft's hormonal sensitivity but the technique of nerve crushing prior to grafting has no such effect.